Review of "Paper or Plastic" in Tribune Review

Kurt Shaw of the Tribune-Review did a piece on the upcoming Paper or Plastic show and a photo of my piece is featured!

I'm going to Pittsburgh for the opening, and I'll be sure to take lots of pictures and post my thoughts on the show. After that, there will be pictures of my new jewelry - I promise! No more photos of my new tools and equipment (although that is very exciting too!) - we'll get back to the good stuff.

Official "Paper or Plastic" Invite

There's not much that is sweeter than being in a show with one of your old professors.

Some Updates

This is a bit belated, but the Daily Art Muse did a little plug of my work back in August. Thanks DAM!

Daily Art Muse - Bugged: Emi Savacool

I also got a little plug on Carrotbox, a website dedicated to non-metal jewelry. Thanks!

Carrotbox - 9/9/2009

Also, my piece, "Emergence", will be featured in the Paper or Plastic? show at Luke and Eloy Gallery in Pittsburgh, PA. The opening is November 14th, so if you're in the area, please stop by!

Paper or Plastic - Luke and Eloy Gallery

It's been awhile!

I haven't posted in some time, mostly because I've been busy with real life. This is kind of a cheap update but trust me when I say the wait is worth it - I am holding off on some sweet announcements. Hopefully I can reveal them soon!

Yesterday I received my new vibratory tumbler - used for polishing metal - and it is HUGE! Much larger than I expected - but it was the same price as one of the tiny rotary tumblers, so how could I say no? Too bad I'm not sharing a studio...

Speaking of studio, I now have a heavy-duty dehumidifier for space, since it is incredibly damp down there. That means there are TWO dehumidifiers working 24/7 to get that place dry. Because of which, I can FINALLY paint it this weekend, barring any sudden torrential downpours. Fingers crossed!

To tide you over, here's a sneak peek at some materials I'm playing around with...

A quick update

Just wanted to share some photos of the bench setup. I'm still waiting on a few items (i.e. my KILN!!) but I got my torch setup finished, a pickle pot, bench pin, and some ghetto ventilation. I can't wait to get working again!

A Journey in Making, Part Three

Sorry for the delay in updating with this third installment - I've been busy with real-life issues. I hope you haven't been biting your nails for this one!

We left off in the last part with the shaped copper wings waiting to be enameled. As you can see, we've jumped a bit in time - I don't have pictures between that one and this. In this picture, I have all of the pieces assembled (but not glued) - the carved boxwood body, the enameled wings, and the two sets of pierced silver components that sandwich the enameled pieces. I had decided to carve the wood a little more to get a better shape, hence the un-dyed portion.

The part we are missing is the making of the silver wings. Each piece started out as part of one big sheet of silver, which was cut out with a tiny saw, filed, and shaped with hammers. The smaller silver pieces that make up the top layer have silver pegs on the bottom that poke through holes in both sets of lower wings and peg them into the wood body.

Now that the beetle was pretty much taken care of, I needed to make the rest of the necklace. If I just strung it on a plain chain, it would look unbalanced, especially in regards to color. These spiculum pieces, made of copper and enamel, were made to go on either side of the bug. The bottom copper shape is what it looks like before it is formed with hammers and a sinusoidal stake.


A lot of my designing is done on the fly. Pretty much 90% of the time I have no idea what the piece is going to look like once I'm finished. Here, I tested out a few different layouts for the chain - this one used tiny commercial chain to connect to the beetle, and the large links were oriented upside-down.

My baby is all grown up! All components of the beetle are finished/oxidized, the body dyed and sealed, and everything glued together and drying. After this, I hammered the links of the chain and oxidized them before assembling. The sad part about my photos is that you can't see the clasp on this piece, which I really like - it's a toggle clasp made up of a large silver ring and an enameled spiculum. Oh well, so there you go - a semi-complete look into the journey of making one of my pieces! Thanks for indulging me!

(photo: "Khepera". carved boxwood, sterling silver, enamel on copper. copyright emi savacool, 2009. model credit: kaitlin kerr. photo credit: ken yanoviak.)

A Journey in Making, Part Two

* This is part two of a three-part story - for part one, scroll down to the last entry! *

This shows the central body piece being fitted to the other two. This one was the most challenging to carve because it had to hug the other body piece exactly. The wood pieces were pegged together with rods of sterling silver, and the fit had to be snug
so that the silver would not show.

After adding an additional wood piece to articulate where the wings attach and pegging everything together, the piece was ready to sand and dye! Our shop tech let me borrow a leather dye that he described as "blacker than black". Yummy~!

After I painted the dye on, I burnished the surface of the wood with a brass brush to work the color in. I did this about 3 times. Later, I sprayed the whole thing with a clear glossy sealant to make the surface more "beetle-y".

Time for the fun part - COLOR! I tend to do a LOT of samples, especially when I'm enameling, because I'm reeeeally picky about the final product. These are a few of my color samples for the outer wings of the beetle. Since I was not making a total copy of any particular beetle species, I needed to come up with a color combination that was alluring as jewelry but also looked convincing on an insect.

I experimented with many transparent enamels to come up with the right color and pattern. These were my final two samples. I decided to go with the left one - the more orangey-red didn't have enough contrast with the greens I chose.

In total, I layered 5 different enamel colors to get the right colors. The reactions between the different layers ended up being important, too - the speckling effect was due to one of the bottom layers coming up through to the top.

Here you can see the wood carving of the body along with the final wing samples and the shaped copper pieces for the actual wings, pre-enamel.

to be continued in Part Three...